Clearance CLR-5705 · AIR172

AIRFAA

Airspace & RegulationClearance sheet

FAA Ground Stop Probe Centers on L3Harris Routers in Texas, Arkansas

An L3Harris-installed router in Amarillo is central to the probe of the Nov. 13 ground stop that halted about 3,500 flights and destabilized 17 of 22 ARTCCs nationwide.

Read-back

  1. Friday's nationwide ground stop grounded about 3,500 flights after data flooded the FAA FTI network at 1,000 connection attempts every 4-5 seconds
  2. The instability affected 17 of 22 Air Route Traffic Control Centers
  3. Investigators traced the fault to sites in Amarillo, Texas and El Dorado, Arkansas, where L3Harris was deploying a new router
  4. The FAA previously found L3Harris 'failed to ensure that redundancies in the system functioned properly' after the September 2025 Dallas outage
  5. L3Harris is testing the routers at its Florida headquarters as the FAA weighs user error versus faulty hardware
Texas Router Installed by L3Harris Probed in FAA Ground Stop Investigation
PlateTexas Router Installed by L3Harris Probed in FAA Ground Stop Investigation — jarmoluk / pixabay

A router installed by defense contractor L3Harris at a facility in Amarillo, Texas, sits at the center of the investigation into last Friday's nationwide ground stop, which grounded roughly 3,500 flights and triggered thousands of cancellations and delays across the US system, including at DFW International Airport and Dallas Love Field.

The Federal Aviation Administration, in a statement posted to its website Sunday, pinpointed the mechanics of the failure: "The FAA's legacy equipment became unstable when data began flooding the FAA FTI network, at a rate of 1,000 connection attempts every 4 to 5 seconds. This disrupted the system and created instability with aircraft communications and radar feeds."

The instability spread fast. The FAA said the fault affected 17 of the 22 Air Route Traffic Control Centers — the facilities that manage en-route traffic across the continental United States.

What do investigators know so far?

The agency traced the data flood to two sites: Amarillo and El Dorado, Arkansas. L3Harris had been deploying a new router at El Dorado at the time the trouble began.

"When these inconsistencies in the data happened, L3Harris blocked those two locations and the network stabilized," the FAA said. "The broadcasting function was also disabled on all the new routers as a precaution."

US Transportation Secretary Sean Duffy, appearing on "Fox News Sunday," said L3Harris has secured routers from the remote facilities in Texas and Arkansas and is running diagnostic testing at its Florida headquarters. On CBS News' "Face the Nation," Duffy confirmed the Texas unit came from Amarillo.

The open question is root cause. Duffy told reporters the FAA is working to determine whether the outage stemmed from user error at L3Harris or from a faulty router installed by the contractor. He also said Saturday that, at least one of the remote FAA locations, L3Harris crews were performing routine maintenance — replacing copper telecommunications lines with fiber.

Is this L3Harris's first FAA failure?

No. The September 2025 outage that snarled operations at DFW and Love Field, causing hundreds of delays and cancellations, already touched the contractor. That event was attributed to "multiple failures" of data supplied by telecommunications company Frontier, which knocked out a Dallas TRACON facility that handles terminal-area traffic.

But the FAA's own post-incident review, as reported by The Dallas Morning News, found that L3Harris "failed to ensure that redundancies in the system functioned properly." In other words, the primary failure belonged to Frontier; the collapse of backup protection belonged to L3Harris.

For an agency racing to modernize aging infrastructure, the pattern matters. The FTI — the FAA Telecommunications Infrastructure network that carries voice and data between facilities — was exactly the segment overwhelmed Friday. Legacy equipment that cannot absorb anomalous traffic from a single new router, combined with a contractor whose redundancy assurances have already been questioned once, gives regulators two intertwined problems: network resilience and vendor oversight.

What has L3Harris said?

The Melbourne, Florida-based contractor issued a statement on social media Saturday: "We are supporting the FAA in its investigation to understand the conditions that led to the Nov. 13 ground stop of our nation's air travel. L3Harris takes the nationwide ground stop and its impact on travelers, airlines and air traffic operations seriously."

The company declined to elaborate when contacted by The News.

What happens next?

The diagnostic testing now underway in Florida should establish whether the routers themselves are defective or whether installation and maintenance procedures — the copper-to-fiber transition among them — opened the door. Airlines, meanwhile, are left counting the cost of a nationwide stoppage that stranded passengers at hubs from Dallas onward. With the FAA's finding on user error versus faulty hardware still pending, and a second high-profile L3Harris-linked failure inside four months, the contractor's role in critical US airspace infrastructure now faces the most consequential scrutiny in its history with the agency.

via dallasnews.com (Original)

Filed under

  • faa
  • l3harris
  • ground-stop
  • air-traffic-control
  • router-failure
Share this article:

More from Nathan Brooks

Nathan Brooks

Show full bio

Correspondent covering technology and product news in Commercial aviation industry coverage at Flightdeck Report.

674 articles

Same bay

« Previous article