Clearance CLR-1527 · SAF268
SAFSOU
Safety & OperationsClearance sheet
Southwest 737 Returns to Orlando After Departure Tyre Blowout
Southwest flight WN2879 returned to Orlando at 16,000 feet after a tyre failure on departure from runway 36R, then landed safely on runway 36L. The 737-700 was airborne about 35 minutes.
Read-back
- WN2879 turned back at 16,000 feet on Nov. 15 after a blown tyre was reported during departure from runway 36R.
- The 737-700 landed on runway 36L about 35 minutes after departure, according to The Aviation Herald.
- The FAA said the incident occurred around 3:55 p.m. local time; the failed tyre and cause remain unidentified.
- N926WN seats 143 passengers in all economy, has two CFM56-7B engines and is listed by Planespotters as 18.4 years old.
- Past Southwest tyre incidents at Orlando include two minor injuries in August 2023 and a hydraulic failure in June 2017.

By Grace Kim
Southwest Airlines flight WN2879 turned back to Orlando at 16,000 feet on Sunday, Nov. 15, after the crew reported a blown tyre during departure from runway 36R.
The Boeing 737-700 was bound for Knoxville, Tennessee, but levelled off, turned around and landed safely on runway 36L about 35 minutes after departure, according to The Aviation Herald.
What happened during the climb?
The aircraft carried registration N926WN. Flightradar24 made the full flight track available, including the initial climb, turn and return to the departure airport.
The source does not give a flight-plan altitude, exact tyre position or cockpit transcript. Those omissions limit any independent assessment of the pilots’ decision to stop climbing at 16,000 feet and return.
What has the FAA established?
The FAA confirmed the event in a short statement. It said:
“Southwest Airlines Flight 2879 returned to and landed safely at Orlando International Airport after the crew reported a blown tire during departure. The FAA is investigating the incident that occurred around 3:55 p.m. local time on Sunday, Nov. 15.”
The statement does not identify which tyre failed or what caused it. It also makes no mention of injuries aboard N926WN.
That leaves the central factual question open: why did a tyre fail during departure? The source also provides no preliminary finding on maintenance or the aircraft’s post-event inspection.
Why did the crew return to Orlando?
The report says a burst tyre on its own seldom puts an aircraft in danger. It also warns that, at high speed, rubber fragments can strike flaps, engines and hydraulic lines, while tyre damage reduces braking performance on landing.
Crews generally prefer to land at a major airport with long runways and fire crews on hand. Orlando offered four parallel runways and a return only minutes away, according to the source.
The return ended the planned leg to Knoxville and put the 143-seat aircraft back at its departure airport. The source gives no figures for passenger delays, rebooking, aircraft downtime or repair cost, so the capacity and financial effects cannot be quantified.
Which aircraft is involved?
- Boeing built N926WN at its Renton factory, where the jet flew under test registration N1786B.
- Its manufacturer serial number is 36629, and its line number is 2663.
- Southwest took delivery in July 2008, and Planespotters gives the aircraft’s age as 18.4 years.
- The jet seats 143 passengers in an all-economy layout and uses two CFM International CFM56-7B engines.
- Planespotters records that Southwest leased the aircraft between January 2009 and August 2020, and still lists the airframe as active.
Has Orlando seen this before?
Southwest has handled two cited tyre incidents at Orlando before:
- In August 2023, flight WN497 to Phoenix blew a nose-wheel tyre on departure and returned; the FAA reported two minor passenger injuries.
- In June 2017, a Southwest 737-300 bound for Pittsburgh suffered a hydraulic failure after a tyre burst on departure.
These examples supply context, not a failure rate. The source gives no fleetwide tyre-failure rate, maintenance backlog or comparable airport data, so it cannot establish a systemic trend.
Still, the two minor injuries in 2023 and the hydraulic failure in 2017 show why crews do not treat tyre failures as trivial. The 2017 case, according to the source, demonstrates that a burst tyre can be followed by damage beyond the wheel. Orlando now has a record worth checking, not one to celebrate.
What remains unresolved?
The FAA investigation will focus on what caused the tyre on N926WN to fail. The agency has not identified the failed tyre, disclosed a cause or reported the aircraft’s repair status in the material provided.
Planespotters still lists the airframe as active. That database status is not an airworthiness finding, and it does not establish whether the aircraft returned to service after the return.
The FAA inquiry should establish the failure mode and repair status, then determine whether the event points to a wider maintenance issue at Orlando. Until then, the safe return remains a completed flight, not a closed safety case.
via theaviationhub.co.uk (Source)
More from Grace Kim
Show full bio
News editor covering companies, deals and strategy in Commercial aviation industry coverage at Flightdeck Report.
640 articles
Same bay
- FDR812United 737 MAX 9 Squawks 7500 After Cockpit Breach Attempt · November 10, 2026
- FDR367Delta CRJ-900 returns to JFK after 20-minute smoke response · November 16, 2026
- FDR590American 737 Crew Shuts Down Engine, Diverts to Orlando With Senator Aboard · November 17, 2026
- FDR772Nine Dead as Learjet 60 Lost With Icing Report Over Florida · November 2, 2026
- FDR262Nine Killed as Learjet 60 Dives Into Palm Beach County Neighborhood · November 2, 2026